5/8" foam plugs to seal mudjacking, slab leveling, and/or termite drilled holes

Description

These Plugs are for 5/8" diameter drill holes or hoses.
Plugs will fit snug in the holes and will support patching materials in those holes for which they are labeled for. These plugs are also used for cleaning powder coat paint supply hoses. Bags of 500 count and larger
quantities
are available.
Tip
: you can taper the drill holes at the top to insure cured patches won't fall through holes. For 1/2" drill holes you would use a 9/16" drill bit and drill 1" down into the 1/2" drill hole. Clean drilling dust out of holes with water or brush from interior of drill holes to help patching materials bond to side walls. Insert a Poly Plug to desired depth, and fill hole with patching materials.
These Plugs are over sized.
We recommend you order the size which is the same as the inside diameter of your hose or drilled holes.
POLY PLUGS
by PEST BOYS
are Faster, Cheaper, and Easier to use.
Poly Plugs
are available for  3/8", 1/2" ,9/16, 5/8"
are packaged in 500 count bags.
Plugs for 1.0", and 1-5/8" drilled holes
and are packaged in 250 count bags or boxes.
Contact us with any questions you may have, or to see if free samples are available.
You can save on shipping if you order multiple bags.