Honda ct70 rear disc brake system complete installation for Hko ko dax

Description

This is a fully CNC machined rear-end disc system. This includes the hub, disc brake, caliper, pads, brake lever master cyclinder system, all bolts and brackets necessary for installation .  some modification will be required but will fit ct70 original
and replica bikes standard rims no offset required, just remove your old hub and rim. Some modification required on chain size measured to assure the sprocket is in-line with your front sprocket add spacers or washers as required  and length.
remove old brake assembly lever and install the new one which is included.This hub is offset  you can elivate this by use washers or turning it down from a machine shop. We have supplied all the hardware that the MFg has said it requires. you
may also need a bushing for the break pedal that goes on the stem of the pedal as this is to big or drill it out to fit this. ask question if your not sure! some modification will be required or brackets modifies and needed bushing also.
So take this
into conderation before purchasing, this is as complete as anyone sold! not for beginers, so be forwarned!
see first pic on bushing that needs to be drill out to fit brake pedal stem on bike, bushing can vaire in style
rear sprocket is 37 tooth!
small modification to brackets or the addition of a spacer (washers) to center the rear sprocket in line with the front sprocket may be requied also so be aware of this
.
works best with aluminum swing arm as that is what it was designed for, see our pics
thanks drct70