Servo Exhaust EXUP Valve F1 light eliminator Eliminator Kawasaki Z1000 -10yr wty

Description

KAWASAKI
Z1000SX (2004-2016)
exhaust valve servo eliminator aka "KAW.EE" is a digital solid-state electronic device that is designed and manufactured 100% right here in the US of A by vizi-tec! This product comes with a factory warranty of 10 years!
This device allows for the replacement of the servo actuator assembly as factory installed on some Kawasaki motorcycles as part of the exhaust system integrated with the ECU (Electronic Control Unit). The unit allows you to get rid of the servo setup thus giving your bike a cleaner look, leaving more room under the seat, save weight, improve performance, improve sound and remove the servo cables to the exhaust butterfly valve that has been known to fail or problematic. A lot cheaper than a have it serviced by the dealer or constant replacement of the mechanical motor assembly!
WORKS ON ALL KAWASAKI MOTORCYCLES WITH FACTORY EXHAUST VALVE INSTALLED!
(ie: No FI error messages). Device is for off-highway or showroom use.
Simple installation
1. Unplug and remove the factory exhaust valve actuator.
2. Remove cable(s) to the actual valve installed within the exhaust. The valve will default to the open position.
3. Plug the KAW.EE into the factory wiring harness using the stock connectors.
4. Use the provided tie wraps or optional double-sided tape or other to secure the KAW.EE as desired.
5. Turn on your ignition and verify your Check Engine Light (FI) message is off. Done!
We try to be very competitive and do regulate our prices to reflect the market. And or pass the savings in terms of our production cost. If you see that our prices have dropped after your purchase, within 30 days we’ll match it.
Unlike the other inferior plastic products out there. The KAW.EE is controlled by a micro-processor that guarantees a constant servo position regardless of voltage fluctuation. The physical device is machined CNC from a single block and epoxied using automotive/marine grade products which makes this the best quality servo eliminator you can get for your Kawasaki. 100% water/grease/dirt proof. And because of this we offer a 10 year warranty!
Unit body: H = 8mm (0.315 inches), L = 24mm (0.945 inches), W = 35mm (1.378 inches), Mass = 20 grams (0.7 ounces)
Works on the following motorcycles:
2004-present Kawasaki ZX10R
2005-
present
Kawasaki ZX6R (And 636)
2003-2006 Kawasaki ZX636
2007-
present
Kawasaki Z750
2007-
present
Kawasaki Z1000
2007-
present
Kawasaki Ninja 1000